\begin
Discover why over 20 million people worldwide trust Overleaf with their work.
% ----------------------------------------------------------------------
% LATEX TEMPLATE FOR PhD THESIS
% ----------------------------------------------------------------------
% based on Harish Bhanderi's PhD/MPhil template, then Uni Cambridge
% http://www-h.eng.cam.ac.uk/help/tpl/textprocessing/ThesisStyle/
% corrected and extended in 2007 by Jakob Suckale, then MPI-CBG PhD programme
% and made available through OpenWetWare.org - the free biology wiki
%: Style file for Latex
% Most style definitions are in the external file PhDthesisPSnPDF.
% In this template package, it can be found in ./Latex/Classes/
\documentclass[twoside,11pt]{Latex/Classes/PhDthesisPSnPDF}
%: Macro file for Latex
% Macros help you summarise frequently repeated Latex commands.
% Here, they are placed in an external file /Latex/Macros/MacroFile1.tex
% An macro that you may use frequently is the figuremacro (see introduction.tex)
% \include{Latex/Macros/MacroFile1}
\usepackage[T1]{fontenc}
\usepackage{array}
\usepackage{pdfpages}
\usepackage{xspace}
\usepackage{xcolor}
\usepackage{lipsum}
%\usepackage{graphics}
% or use the graphicx package for more complicated commands
%\usepackage{graphicx}
%: ----------------------------------------------------------------------
%: TITLE PAGE: name, degree,..
% ----------------------------------------------------------------------
\usepackage{graphicx}
\textwidth 15cm
\textheight 22cm
\parindent 10pt
\oddsidemargin 0.85cm
\evensidemargin 0.37cm
\newcommand{\ie}{\emph{i.e.,}\xspace}
\newcommand{\eg}{\emph{e.g.,}\xspace}
\newcommand{\etc}{etc.\xspace}
\newcommand{\etal}{\emph{et~al.}\xspace}
\newcommand{\todo}[1]{\textcolor{blue}{#1}}
\begin{document}
\thispagestyle{empty}
\begin{center}
Vrije Universiteit Amsterdam \hspace*{2cm} Universiteit van Amsterdam
\vspace{1mm}
\hspace*{-6.5cm}\includegraphics[height=20mm]{0_frontmatter/figures/vu-griffioen.pdf}
\vspace*{-2cm}\hspace*{7.5cm}\includegraphics[height=15mm]{0_frontmatter/figures/uva_logo.jpg}
\vspace{2cm}
{\Large Master Thesis}
\vspace*{1.5cm}
\rule{.9\linewidth}{.6pt}\\[0.4cm]
{\huge \bfseries Title of the Thesis\par}\vspace{0.4cm}
\rule{.9\linewidth}{.6pt}\\[1.5cm]
\vspace*{2mm}
{\Large
\begin{tabular}{l}
{\bf Author:} ~~student name ~~~~ (student number)
\end{tabular}
}
\vspace*{2cm}
\begin{tabular}{ll}
{\it 1st supervisor:} & ~~supervisor name \\
{\it daily supervisor:} & ~~supervisor name ~~~~ (company, if applicable) \\
{\it 2nd reader:} & ~~supervisor name
\end{tabular}
\vspace*{2.5cm}
\textit{A thesis submitted in fulfillment of the requirements for\\ the joint UvA-VU Master of Science degree in Computer Science}
\vspace*{1.8cm}
\today\\[4cm] % Date
\end{center}
\newpage
% ----------------------------------------------------------------------
% turn of those nasty overfull and underfull hboxes
\hbadness=10000
\hfuzz=50pt
%: --------------------------------------------------------------
%: FRONT MATTER: dedications, abstract,..
% --------------------------------------------------------------
%\language{english}
% sets line spacing
\renewcommand\baselinestretch{1.2}
\baselineskip=18pt plus1pt
%: ----------------------- generate cover page ------------------------
\begin{center}
\textit{``I am the master of my fate, I am the captain of my soul'' \\ from {\em Invictus}, by William Ernest Henley}
\end{center}
%: ----------------------- cover page back side ------------------------
% Your research institution may require reviewer names, etc.
% This cover back side is required by Dresden Med Fac; uncomment if needed.
\newpage
%\vspace{10mm}
%1. First Reader: Name Surname
%
%\vspace{10mm}
%2. Daily Supervisor: Name Surname
%
%\vspace{10mm}
%3. Second Reader: Name Surname
%
%\vspace{10mm}
%4. Industrial Supervisor: Name Surname
%
%\vspace{20mm}
%Day of the defense:
%\vspace{20mm}
%\hspace{70mm}Signature from head of PhD committee:
%: ----------------------- abstract ------------------------
% Your institution may have specific regulations if you need an abstract and where it is to be placed in the document. The default here is just after title.
\include{0_frontmatter/abstract}
% The original template provides and abstractseparate environment, if your institution requires them to be separate. I think it's easier to print the abstract from the complete thesis by restricting printing to the relevant page.
% \begin{abstractseparate}
% \input{Abstract/abstract}
% \end{abstractseparate}
%: ----------------------- tie in front matter ------------------------
\frontmatter
\include{0_frontmatter/dedication}
\include{0_frontmatter/acknowledgement}
%: ----------------------- contents ------------------------
\setcounter{secnumdepth}{3} % organisational level that receives a numbers
\setcounter{tocdepth}{3} % print table of contents for level 3
\tableofcontents % print the table of contents
% levels are: 0 - chapter, 1 - section, 2 - subsection, 3 - subsection
%: ----------------------- list of figures/tables ------------------------
\listoffigures % print list of figures
\listoftables % print list of tables
%: ----------------------- glossary ------------------------
% Tie in external source file for definitions: /0_frontmatter/glossary.tex
% Glossary entries can also be defined in the main text. See glossary.tex
%
%\include{0_frontmatter/glossary}
%\begin{multicols}{2} % \begin{multicols}{#columns}[header text][space]
%\begin{footnotesize} % scriptsize(7) < footnotesize(8) < small (9) < normal (10)
%\printnomenclature[1.5cm] % [] = distance between entry and description
%\label{nom} % target name for links to glossary
%\end{footnotesize}
%\end{multicols}
%: --------------------------------------------------------------
%: MAIN DOCUMENT SECTION
% --------------------------------------------------------------
% the main text starts here with the introduction, 1st chapter,...
\mainmatter
\renewcommand{\chaptername}{} % uncomment to print only "1" not "Chapter 1"
%: ----------------------- subdocuments ------------------------
% Parts of the thesis are included below. Rename the files as required.
% But take care that the paths match. You can also change the order of appearance by moving the include commands.
\input{sections/intro}
\input{sections/background}
\input{sections/overview}
\input{sections/design}
\input{sections/evaluation}
\input{sections/discussion}
\input{sections/threats}
\input{sections/related}
\input{sections/conclusion}
% --------------------------------------------------------------
%: BACK MATTER: appendices, refs,..
% --------------------------------------------------------------
% the back matter: appendix and references close the thesis
%: ----------------------- bibliography ------------------------
% The section below defines how references are listed and formatted
% The default below is 2 columns, small font, complete author names.
% Entries are also linked back to the page number in the text and to external URL if provided in the BibTex file.
% PhDbiblio-url2 = names small caps, title bold & hyperlinked, link to page
%\begin{multicols}{2} % \begin{multicols}{ # columns}[ header text][ space]
%\begin{tiny} % tiny(5) < scriptsize(7) < footnotesize(8) < small (9)
\bibliographystyle{Latex/Classes/PhDbiblio-url2} % Title is link if provided
\renewcommand{\bibname}{References} % changes the header; default: Bibliography
\bibliography{references} % adjust this to fit your BibTex file
\include{sections/appendix}
%\end{tiny}
%\end{multicols}
% --------------------------------------------------------------
% Various bibliography styles exit. Replace above style as desired.
% in-text refs: (1) (1; 2)
% ref list: alphabetical; author(s) in small caps; initials last name; page(s)
%\bibliographystyle{Latex/Classes/PhDbiblio-case} % title forced lower case
%\bibliographystyle{Latex/Classes/PhDbiblio-bold} % title as in bibtex but bold
%\bibliographystyle{Latex/Classes/PhDbiblio-url} % bold + www link if provided
%\bibliographystyle{Latex/Classes/jmb} % calls style file jmb.bst
% in-text refs: author (year) without brackets
% ref list: alphabetical; author(s) in normal font; last name, initials; page(s)
%\bibliographystyle{plainnat} % calls style file plainnat.bst
% in-text refs: author (year) without brackets
% (this works with package natbib)
% --------------------------------------------------------------
% according to Dresden med fac summary has to be at the end
%\include{0_frontmatter/abstract}
%: Declaration of originality
%\include{8_backmatter/declaration}
\end{document}