Aayush Chugh's CV
Author
Aayush chugh
Last Updated
5 years ago
License
LaTeX Project Public License 1.3c
Abstract
Aayush Chugh's CV
Aayush Chugh's CV
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Wenneker Resume/CV
% LaTeX Template
% Version 1.1 (19/6/2016)
%
% This template has been downloaded from:
% http://www.LaTeXTemplates.com
%
% Original author:
% Frits Wenneker (http://www.howtotex.com) with extensive modifications by
% Vel (vel@LaTeXTemplates.com)
%
% License:
% CC BY-NC-SA 3.0 (http://creativecommons.org/licenses/by-nc-sa/3.0/
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%----------------------------------------------------------------------------------------
% PACKAGES AND OTHER DOCUMENT CONFIGURATIONS
%----------------------------------------------------------------------------------------
\documentclass[a4paper,10pt]{memoir} % Font and paper size
\input{structure.tex} % Include the file specifying document layout and packages
%----------------------------------------------------------------------------------------
% NAME AND CONTACT INFORMATION
%----------------------------------------------------------------------------------------
\userinformation{ % Set the content that goes into the sidebar of each page
\begin{flushright}
% Comment out this figure block if you don't want a photo
\includegraphics[width=0.9\columnwidth]{Aayush}\\[\baselineskip] % Your photo
\small % Smaller font size
Aayush Chugh \\ % Your name
\url{aayush.chugh@stud.vgtu.lt} \\ % Your email address
\url{achugh899@gmail.com} \\ % Your URL
+370 695 67 358
+370 623 51857 \\ % Your phone number
\Sep % Some whitespace
\textbf{Address} \\
Sauletekis Al.25 \\ % Address 1
Vilnius, LT-10225 \\ % Address 2
Lithuania \\ % Address 3
\vfill % Whitespace under this block to push it up under the photo
\end{flushright}
}
%----------------------------------------------------------------------------------------
\begin{document}
\userinformation % Print your information in the left column
\framebreak % End of the first column
%----------------------------------------------------------------------------------------
% HEADING
%----------------------------------------------------------------------------------------
\cvheading{Aayush Chugh} % Large heading - your name
\cvsubheading{Automotive Engineer} % Subheading - your occupation/specialization
%----------------------------------------------------------------------------------------
% Objective
%----------------------------------------------------------------------------------------
\aboutme{Objective}{Seeking to leverage academic and practical acumen gathered in clinching opportunities in reputed company for both personal and professional growth}
%----------------------------------------------------------------------------------------
% EDUCATION
%----------------------------------------------------------------------------------------
\CVSection{Education}
%------------------------------------------------
\CVItem{2019 - 2021, Vilniaus Gedimino technikos universitetas
}{Masters in Automotive Engineering}
%------------------------------------------------
\CVItem{2014 - 2018, University of Petroleum and Energy Studies, Dehradun, India}{Bachelor of Technology in Automotive Design Engineering}
Projects:
\begin{itemize}
\item Design and Analysis of 2016 and 2017 F1 Front Wing
\item Dirt analysis on the performance of an engine cooling system
\item Design, Analysis and Fabrication of Hybrid Vehicle organized by ISIE
\item Boundary layer separation by the application of synthetic jets
\item Extreme engine downsizing by doubling the firing frequency in a boosted
direct injection gasoline engine
\item Performance and emission analysis of a diesel engine implementing polanga
Bio diesel and optimization using Taguchi method
\end{itemize}
%------------------------------------------------
\Sep % Extra whitespace after the end of a major section
%----------------------------------------------------------------------------------------
%EXPERIENCE
%----------------------------------------------------------------------------------------
\CVSection{Experience}
%------------------------------------------------
\CVItem{Feb 2019 - Aug 2019, \textit{US IT Recruiter}, Head Field Solutions Pvt. Ltd}{
Responsibilities:
\begin{itemize}
\item Responsible for handling IT requirements from US based clients.
\item Responsible for full-cycle recruiting: interview, offer, negotiation and closed candidates for assigned requisitions.
\item Sourcing from Job Portals (Monster, Dice, Career builder, Yahoo Hot Jobs), Making job postings on the Job Portal.
\item Well versed about US Terms like W2, C2C, 1099, US Visas, etc.
\item Responsible to work on Contract, Permanent and C2H (Contract to Hire) positions.
\item Responsible for achieving a good conversion ratio of submittals into interview and placement
\end{itemize}
}
%------------------------------------------------
\CVItem{Jun 2018 - Feb 2019, \textit{Product Design Engineer}, Qaurus Pneumatics India Pvt. Ltd}{
Responsibilities:
\begin{itemize}
\item Design and modification of cabin interior paneling, storage compartment/toolbox and floor mat in compliance with the FMVSS for NOVG (New Overseas Vehicle Generation-EURO VI) Project and saved around €7000 in the proto parts development cost.
\item Coordinated projects with overseas counterparts in MAN Truck and Bus, Germany and with SINOTRUK, China to get 5000+ translated CAD drawings from Mandarin to English and check-in delivery of their 3D models.
\item Analyzed and updated the existing paint and coating process to standard process in alignment with the production and purchase department.
\item Modified the design and FEA of blind spot mirror mounting provision for the new vehicle to be launched for deep mining applications.
\item Tracked the proto-parts development for a new vehicle launched in 2018 with DFMEA, DVP, visiting suppliers with the product development team to expedite the process which resulted in the early start of the testing phase.
\item Contributed to the implementation of new designs for CLA truck cabin by interacting with testing, production, supplier, quality and validation departments which lead to cost reduction.
\end{itemize}
}
%------------------------------------------------
\CVItem{Jun 2017 - Sep 2017, \textit{Engineer Trainee}, Faurecia Automotive India Pvt. Ltd}{
Projects:
\begin{itemize}
\item Design of Double Wishbone Vehicle Suspension System Force Analyzer and Ride Height Calculator
\item Design of a program to calculate Vehicle Suspension System Characteristics which helped to do cumbersome analysis and calculations of 20x20 matrix
\item Design of Anti-Roll Bar Stiffness and Stresses Calculator
\item Reduction of waste in Lean Manufacturing and Tact Time Calculation
\item Product Quality Control Table creation using MS Excel and Zone Layout formation using Solid works
\end{itemize}
}
%----------------------------------------------------------------------------------------
% NEW PAGE DELIMITER
% Place this block wherever you would like the content of your CV to go onto the next page
%----------------------------------------------------------------------------------------
\clearpage % Start a new page
\userinformation % Print your information in the left column
\framebreak % End of the first column
\CVItem{Jun 2016 - Jul 2016, \textit{Vocational Trainee}, Maxop Engineering India Pvt. Ltd}{
Subjet: Identification and Visual aid for different gear parts of the transmission box:
\begin{itemize}
\item Approach to eradicate the problem using 8-D Quality Tools
\item Modification of Assembly Line
\end{itemize}
Subjet: Design of Automated Guided Vehicle
\begin{itemize}
\item Benchmarking of Google Toyota Prius
\item U-V Joint Design
\end{itemize}
Subjet: Designing of Die Casting Components
\begin{itemize}
\item CAD Model of Components of Die Casting using NX10
\item Flow Simulation of Aluminium Die Casting using Magma.
\end{itemize}
}
%----------------------------------------------------------------------------------------
\Sep % Extra whitespace after the end of a major section
\CVSection{Fellowships/Awards}
%------------------------------------------------
\CVItem{2019, \textit{Postgraduate Scholarship}, Vilniaus Gedimino technikos universitetas}{Awarded 50 Percent Scholarship for masters in Automotive Engineering}
\CVItem{2017, \textit{Best Design and lightest Vehicle Award}, Hybrid Vehicle Challenge}{Awarded Best Design and lightest Vehicle Award at Buddh International Circuit}
\CVItem{2012, \textit{Maths Olympiad}, Government of India}{Merit Holder}
%------------------------------------------------
\Sep % Extra whitespace after the end of a major section
\CVSection{Certifications}{
%------------------------------------------------
\begin{itemize}
\item Certified training on Advanced Structural Design, basics of Strength of Materials and its application into Finite Element Analysis of components, to analyze and study the structural behavior of new and existing designs and teaching of CATIA, ANSYS and Nastran-Patran by Aerosphere
\item Six Sigma and Lean Champion Certification Course by Indian Centre for Manufacturing Excellence
\end{itemize}
}
%----------------------------------------------------------------------------------------
%----------------------------------------------------------------------------------------
\Sep % Extra whitespace after the end of a major section
\CVSection{Publications}
%------------------------------------------------
\begin{itemize}
\item Aayush Chugh; Rachit Ahuja. Design, CFD Analysis and Lap Time Simulation of FSAE Car. Researchfora 14th International Conference, Hamburg, Germany 22nd-23rd January 2018
\item Aayush Chugh; Rachit Ahuja; Sukriti Ranjan. Shape Optimization of Automobile Chassis. International Journal of Engineering and Technical Research V6(02) DOI: 10.17577/IJERTV6IS020388
\item Aayush Chugh; Rachit Ahuja. Modelling and Simulation of Jake Braking System. International Journal of Engineering and Technology for Research.Paper Id- IJRDT1001321
\item Aayush Chugh; Archiel Aggarwal. Synchronous Power Supply. Imperial Society of Innovative Engineers.Hybrid Vehicle Challenge at Buddh International Circuit, February 2018
\end{itemize}
%------------------------------------------------
\Sep % Extra whitespace after the end of a major section
%----------------------------------------------------------------------------------------
\CVSection{Softwares}
%------------------------------------------------
\CVItem{Simulation}{
Simulink | •AMESim | •Stateflow | •Model-in-loop (MIL) | •Model based Design and Simulation | •Embdded Control System Design}
\CVItem{Design}{
CATIA V5 | •Solidworks | •Ansys Workbench | •Nastran-Patra | •Hypermesh | •Siemens NX10}
\CVItem{Numerical}{
Star CCM | •Converge | •Fluent
}
\CVItem{Programming}{
MATLAB | •VBA | •Python | •Arduino | •C}
\CVItem{Applications}{
Microsoft Office
}
\Sep % Extra whitespace after the end of a major section
%----------------------------------------------------------------------------------------
\CVSection{Languages}{
%------------------------------------------------
\begin{itemize}
\item Hindi- Mother Tongue
\item Punjabi- Mother Tongue
\item English- C1 Proficient User
\item German- A2 Beginner's Level
\end{itemize}
}
\Sep % Extra whitespace after the end of a major section
\end{document}