Official LaTeX template for the 20th International Conference on Electrorheological Fluids and Magnetorheological Suspensions (ERMR 2027), hosted by UNIFEI in Brazil. For submission guidelines, visit https://ermr2027.unifei.edu.br/
\begin
Discover why over 25 million people worldwide trust Overleaf with their work.
\documentclass{ermr2027}
% This file demonstrates the BibTeX bibliography workflow.
% This file is a practical guide. The class applies the required layout
% automatically. Replace the sample information below with your own.
% --------------------------------------------------------------------------
% Preamble
% Load additional needed packages.
% The follwing packages are already loaded by the class:
% graphicx, booktabs, multirow, amsmath, amssymb, amsfonts, amsthm, mathtools,
% xcolor, colortbl, caption, tikz
%
% Do not alter fonts, geometry, dimensions, header/footers or anything structural
% --------------------------------------------------------------------------
\begin{document}
% --------------------------------------------------------------------------
% Title block
% --------------------------------------------------------------------------
\title{ERMR 2027 Extended Abstract Template (Maximum Two Pages)}
% Add one \author command per author. The optional argument gives the
% affiliation number(s). Wrap the presenting author's name in \presenter{...}.
% optionally add orcid link inside `\author' argument
\author[1,2]{First A. Author\orcidlink{0000-0000-0000-0000}}
% wrap author's name with `\presenter' to identify who will be presenting the work at the conference
\author[1,2]{\presenter{Second B. Author}\orcidlink{0000-0000-0000-0001}}
\author[3]{Third C. Author}
% Add one \affil command per affiliation or e-mail line.
\affil[1,2]{Department, Institute, Organization, Country}
\affil[]{E-mail: first.author@example.org, second.author@example.org}
\affil[3]{Department, Institute, Organization, Country}
\affil[]{E-mail: third.author@example.org}
% Use one paragraph of no more than 100 words.
\shortabstract{Provide a concise, self-contained summary of the work in one paragraph. State the purpose, approach, principal results, and main conclusion, as appropriate. The short abstract must not exceed 100 words.}
% Provide no more than five comma-separated keywords.
\keywords{electrorheological fluids, magnetorheological suspensions, rheology, smart materials, modelling}
% --------------------------------------------------------------------------
% Bibliography: default mode is BibTeX
% --------------------------------------------------------------------------
% The portable ERMR commands below work with either BibTeX or BibLaTeX.
% Use the .bib file name without its extension.
\ermrbibresource{myrefs}
%
% The equivalent native BibTeX commands, placed before \end{document}, are:
% \bibliographystyle{vancouver}
% \bibliography{myrefs}
\maketitle
\section{Introduction}
This document illustrates the preparation of an extended abstract with the ERMR 2027 \LaTeX\ class. Replace the sample content with your own work. The complete submission, including the title block, text, figures, tables, acknowledgments, and references, must be written in English and must not exceed two pages.
Use the standard sectioning commands, such as \verb|\section{...}| and \verb|\subsection{...}|. Select headings appropriate to the work; a typical structure includes an introduction, objectives, materials and methodology, results and discussion, conclusions, acknowledgements, and references.
Use the usual \verb|\cite{key}| command for citations, for example \cite{winslow1949,rabinow1948}. In the default mode, compile with \texttt{pdfLaTeX}, \texttt{BibTeX}, and \texttt{pdfLaTeX} twice. References are formatted in Vancouver style and numbered in order of first citation.
\section{Objectives}
State the aim or aims of the work clearly. Identify the scientific or technological question addressed and the intended contribution.
\section{Materials and Methodology}
Describe the materials, experimental setup, methods, models, and analytical procedures with sufficient detail to support the reported results.
\subsection{Subsection example}
Use subsections only where they improve the organization of the extended abstract.
\section{Results and Discussion}
Present the main results concisely and discuss their relevance. Include only the figures, tables, equations, and images needed to support the argument.
\begin{table}[!ht]
\caption{Example table.}
\label{tab:example}
\centering
\small
\begin{tabular}{ccc}
\toprule
\textbf{Column heading} & \textbf{Column heading} & \textbf{Column heading} \\
\midrule
Row 1a & Row 1b & Row 1c \\
Row 2a & Row 2b & Row 2c \\
Row 3a & Row 3b & Row 3c \\
\bottomrule
\end{tabular}
\end{table}
An equation may be set, for instance, with the standard \texttt{equation} environment:
\begin{equation}
\zeta(4) = \frac{1}{6}\int_{0}^{\infty}\frac{x^3}{\mathrm{e}^x-1}\,\mathrm{d}x
= \sum_{n=1}^{\infty}\frac{1}{n^4} = \frac{\pi^4}{90}.
\end{equation}
\begin{figure}[!ht]
\centering
\includegraphics[width=0.50\textwidth]{placeholder.png}
\caption{Example figure. Replace \texttt{placeholder.png} with your own image file.}
\label{fig:example}
\end{figure}
\section{Conclusions}
Summarize the principal findings and, where appropriate, their implications or next steps in a few concise sentences.
\section*{Acknowledgments}
Acknowledge funding agencies, institutional support, scholarships, and other relevant contributions, where applicable.
% The portable ERMR command prints the bibliography in either mode.
\printermrbibliography{myrefs}
\end{document}
\documentclass{ermr2027}
% This file demonstrates the BibTeX bibliography workflow.
% This file is a practical guide. The class applies the required layout
% automatically. Replace the sample information below with your own.
% --------------------------------------------------------------------------
% Title block
% --------------------------------------------------------------------------
\title{ERMR 2027 Extended Abstract Template (Maximum Two Pages)}
% Add one \author command per author. The optional argument gives the
% affiliation number(s). Wrap the presenting author's name in \presenter{...}.
\author[1,2]{First A. Author\orcidlink{0000-0000-0000-0000}}
\author[1,2]{\presenter{Second B. Author}}
\author[3]{Third C. Author}
% Add one \affil command per affiliation or e-mail line.
\affil[1,2]{Department, Institute, Organisation, Country}
\affil[]{E-mail: first.author@example.org, second.author@example.org}
\affil[3]{Department, Institute, Organisation, Country}
\affil[]{E-mail: third.author@example.org}
% Use one paragraph of no more than 100 words.
\shortabstract{Provide a concise, self-contained summary of the work in one paragraph. State the purpose, approach, principal results, and main conclusion, as appropriate. The short abstract must not exceed 100 words.}
% Provide no more than five comma-separated keywords.
\keywords{electrorheological fluids, magnetorheological suspensions, rheology, smart materials, modelling}
% --------------------------------------------------------------------------
% Bibliography: default mode is BibTeX
% --------------------------------------------------------------------------
% The portable ERMR commands below work with either BibTeX or BibLaTeX.
% Use the .bib file name without its extension.
\ermrbibresource{myrefs}
%
% The equivalent native BibTeX commands, placed before \end{document}, are:
% \bibliographystyle{vancouver}
% \bibliography{myrefs}
\begin{document}
\maketitle
\section{Introduction}
This document illustrates the preparation of an extended abstract with the ERMR 2027 \LaTeX\ class. Replace the sample content with your own work. The complete submission, including the title block, text, figures, tables, acknowledgments, and references, must be written in English and must not exceed two pages.
Use the standard sectioning commands, such as \verb|\section{...}| and \verb|\subsection{...}|. Select headings appropriate to the work; a typical structure includes an introduction, objectives, materials and methodology, results and discussion, conclusions, acknowledgements, and references.
Use the usual \verb|\cite{key}| command for citations, for example \cite{winslow1949,rabinow1948}. In the default mode, compile with \texttt{pdfLaTeX}, \texttt{BibTeX}, and \texttt{pdfLaTeX} twice. References are formatted in Vancouver style and numbered in order of first citation.
\section{Objectives}
State the aim or aims of the work clearly. Identify the scientific or technological question addressed and the intended contribution.
\section{Materials and Methodology}
Describe the materials, experimental setup, methods, models, and analytical procedures with sufficient detail to support the reported results.
\subsection{Subsection example}
Use subsections only where they improve the organization of the extended abstract.
\section{Results and Discussion}
Present the main results concisely and discuss their relevance. Include only the figures, tables, equations, and images needed to support the argument.
\begin{table}[!ht]
\caption{Example table.}
\label{tab:example}
\centering
\small
\begin{tabular}{ccc}
\toprule
\textbf{Column heading} & \textbf{Column heading} & \textbf{Column heading} \\
\midrule
Row 1a & Row 1b & Row 1c \\
Row 2a & Row 2b & Row 2c \\
Row 3a & Row 3b & Row 3c \\
\bottomrule
\end{tabular}
\end{table}
An equation may be set with the standard \texttt{equation} environment:
\begin{equation}
\zeta(4) = \frac{1}{6}\int_{0}^{\infty}\frac{x^3}{\mathrm{e}^x-1}\,\mathrm{d}x
= \sum_{n=1}^{\infty}\frac{1}{n^4} = \frac{\pi^4}{90}.
\end{equation}
\begin{figure}[!ht]
\centering
\includegraphics[width=0.50\textwidth]{placeholder.png}
\caption{Example figure. Replace \texttt{placeholder.png} with your own image file.}
\label{fig:example}
\end{figure}
\section{Conclusions}
Summarize the principal findings and, where appropriate, their implications or next steps in a few concise sentences.
\section*{Acknowledgments}
Acknowledge funding agencies, institutional support, scholarships, and other relevant contributions, where applicable.
% The portable ERMR command prints the bibliography in either mode.
\printermrbibliography{myrefs}
\end{document}